Barrett Rifles

IF YOU DO NOT SEE THE MODEL YOU WANT, EMAIL US, WE CAN GET ALL MODELS FROM OUR WAREHOUSE OR SUPPLIERS...

As a dealer in only the highest quality guns that are available, you can rest assured when you choose a firearm or accessory from our web site, it is going to be brand new and of the highest quality. We do NOT run your card for any purchase until we are assured that the item is either in stock or inbound from our suppliers.
 
Sort By:  
  • BARRETT 82CQ 50BMG SEMIAUTO 20.6" - BFM13318 (13318)
    This item is in stock at a supplier and should ship to you in 5-7 days.

    After 30-plus years of making history, the powerhouse rifle that started it all is still leading the pack. With its low felt recoil and self-loading action, the Model 82A1 offers rapid, accurate firepower that never slows down.
    For more than three decades, the Model 82A1 has been carefully honed, studied and then refined again. The result is a feat of engineering so infinitely precise it is hard to believe it's man-made.
    As the first and only semi-automatic .50 caliber rifle available, the Model 82A1 continues to blaze new territory. Its chamber is chrome-plated and dimensioned for both civilian and military ammunition. The extractor and ejector are proven to work under any condition, and close tolerances on every part allow it to function in all environments. The muzzle brake, dual barrel springs and long mainspring design make this iconic rifle comfortable and exciting to shoot.
    The .416 Barrett caliber brings new levels of precision shooting to the Model 82A1. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision.

    The Model 82A1 fits into a regular sized carrying case. Although it’s transported as a disassembled upper and lower receiver, it can be ready to fire in under a minute. The scope remains mounted on the upper receiver, maintaining zero. The rifle’s M1913 optics rail has a 27 MOA taper to take full advantage of the scope’s elevation travel.

    Emergency iron sights provided. Nerves of steel are not
    Barrett, 82CQ, Semi-automatic, 50BMG, 20.6" Barrel, Black Finish, Synthetic Stock, 10Rd, Carry Case and Cleaning Kit, 1 Magazine
    Product Specifications
    • 816715010193
    • Barrett
    • 82CQ
    • Semi-automatic
    • 50BMG
    • 20.6"
    • Black
    • Synthetic
    • Carry Case and 1 Mag
    • 10Rd
    • 13318
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     
    Add to Cart
    $7,989.00
    $9,119.00
  • BARRETT 82A1 .416B SEMIAUTO 29" BLK - BFM13315 (13315)
    This item is in stock at a supplier and should ship to you in 5-7 days.
     

    Three Decades Down Range.

    Model 82A1 in action
    After 30-plus years of making history, the powerhouse rifle that started it all is still leading the pack. With its low felt recoil and self-loading action, the Model 82A1 offers rapid, accurate firepower that never slows down.
    For more than three decades, the Model 82A1 has been carefully honed, studied and then refined again. The result is a feat of engineering so infinitely precise it is hard to believe it's man-made.
    As the first and only semi-automatic .50 caliber rifle available, the Model 82A1 continues to blaze new territory. Its chamber is chrome-plated and dimensioned for both civilian and military ammunition. The extractor and ejector are proven to work under any condition, and close tolerances on every part allow it to function in all environments. The muzzle brake, dual barrel springs and long mainspring design make this iconic rifle comfortable and exciting to shoot.
    Model 82A1
    .416 Barrettt Non-Detachable Magazine
    The .416 Barrett caliber brings new levels of precision shooting to the Model 82A1. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision. The Model 82A1 .416 is also available with a non-detachable magazine for state compliance purposes in which the magazine can easily be accessed for loading with a simple tool. For owners that want to swap their .50 caliber configurations to .416 caliber, upper conversion units are available on the Barrett webstore.
    The Model 82A1 fits into a regular sized carrying case. Although it’s transported as a disassembled upper and lower receiver, it can be ready to fire in under a minute. The scope remains mounted on the upper receiver, maintaining zero. The rifle’s M1913 optics rail has a 27 MOA taper to take full advantage of the scope’s elevation travel.
    Emergency iron sights provided. Nerves of steel are not.
    Barrett, 82A1, Semi-automatic, 416 Barrett, 29" Fluted Barrel, Black Finish, Synthetic Stock, 10Rd, Carry Case and Cleaning Kit, 1 Magazine
    Product Specifications
    • 816715011404
    • Barrett
    • 82A1
    • Semi-automatic
    • 416 Barrett
    • 29"
    • Black
    • Black
    • Right Hand
    • 10Rd
    • 13315
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.

     
    Add to Cart
    $8,241.00
    $9,119.00
  • BARRETT 99A1 50BMG 29" FLUTED BLK - BFM13305 (13305 )

    Power, pure and simple.

    Model 99
    Rugged. Reliable. Uncomplicated. The Model 99 is designed for one thing only: to get the job done. With its brilliantly simple design, hard-core construction and surprisingly few moving parts, it offers match-winning accuracy time and time again.
    Smooth functionality with dead-on accuracy, shot after shot, the Model 99 in .50 BMG is competition ready. At the heart of this robust and accurate bolt action rifle is a one-piece 7000 series aluminum alloy extrusion. A heat-treated steel M1913 rail is attached to the top of the extrusion by closely spaced high-strength bolts. The match grade barrel is pressed and locked into the receiver, creating a solid unitized structure on which to mount a riflescope. The Model 99 barrel is made in a heavier contour to ensure repeatable accuracy.
    The .416 Barrett caliber brings new levels of precision shooting to the Model 99. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision.
    The bolt is machined from a single piece of S-7 tool steel. The action's strength is exemplified by the 15 bolt lugs that lock into the machined barrel extension. The bolt's few moving parts (extractor, ejector and firing pin assembly) make it reliable and easy to maintain.
    Model 99 in action
    The Model 99 is easily disassembled without tools by removing three quick-release assembly pins. These pins attach the trigger housing and bolt guide to the receiver assembly. The match-quality trigger design is virtually maintenance-free and the bipod can easily be detached for benchrest shooting.
    Known as much for its dependability as its versatility, the Model 99 has unfailing accuracy you can rely on.
    Barrett, 99A1, Single Shot, Bolt Action, 50BMG, 29" Barrel, Black Finish, Bi-Pod
    Product Specifications
    • 816715010254
    • Barrett
    • 99A1
    • Single Shot
    • 50BMG
    • 29"
    • Black
    • Black
    • Fluted
    • Bi-Pod
    • 13305
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     

     
    Add to Cart
    $3,680.00
    $4,120.00
  • BARRETT MRAD 338LAP 24" MULTI ROLE BROWN HB 10RD - BFM14348 (14348)

    At your command.

    Ready to follow your every move, the MRAD adapts to a variety of user needs without sacrificing performance. With unfailing accuracy, this bolt-action system continues to define a whole new class of long-range precision rifles.
    The MRAD rifle's user-changeable barrel system is just one example of this hardworking gun's modularity. Available in .338 Lapua Magnum, .300 Winchester Magnum, .308 Winchester, .260 Remington and 6.5 Creedmoor, the precision grade barrel can be removed by simply loosening two bolts using a standard Torx wrench. Besides reducing maintenance and logistical burdens, this unique design allows for user level caliber interchangeability and serviceability with the MRAD rifle's barrel kits.
    The MRAD also boasts Barrett's fully adjustable match-grade trigger module, which is user accessible. The thumb-operated safety can be configured for left or right hand operation. The ambidextrous magazine release can be used intuitively while retaining a firing grip and cheek weld.
    Integrated into the MRAD rifle's 7000 series aluminum upper receiver is a 21.75 inch M1913 rail with 20 MOA taper. The forward receiver is drilled and tapped for accessory rails to be mounted at the 3, 6 and 9 o'clock positions.
    The MRAD stock is foldable for enhanced portability yet locks in as solid as a fixed-stock rifle, creating a rigid platform for consistent firing. During transport the stock folds and locks onto the bolt handle maintaining the same rifle width whether folded or extended.
    Made of a temperature-resistant polymer, the adjustable cheek piece also offers a consistent rifle-to-user contact point. The rifle's length of pull can be set to five different positions with the push of a single button.
    From its quick-detach sling mounts to the Barrett Multi-Role Brown color that blends into any environment - every detail of the MRAD has been carefully designed to create one thing: a high-performance rifle you can truly make your own.
    Barrett, MRAD, Bolt Action, 338 Lapua, 24" Heavy Barrel, Multi-Role Brown Finish, Folding Stock, 10Rd, 2 Magazines, Sling Loops, 3 Rails, Hard Case
    Product Specifications
    • Barrett
    • MRAD
    • Bolt
    • 338 Lapua
    • 24"
    • Multi-Role Brown
    • Folding
    • 2-10Rd Mags, Sling Loops, 3 Rails, Hard Case
    • Black Heavy Barrel
    • 10Rd
    • 14348
    Barrett, MRAD, Bolt Action, 338 Lapua, 24" Heavy Barrel, Multi-Role Brown Finish, Folding Stock, 10Rd, 2 Magazines, Sling Loops, 3 Rails, Hard Case

    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     
    Add to Cart
    $5,656.00
    $6,000.00
  • BARRETT M107A1 50BMG 29" BLACK 10RD - BFM14018 (14018)

    A whole new legend.


     
    It may be related to the Model 82A1®/M107®, but the M107A1 is far from a simple evolution. Driven by the demands of combat, every component was re-engineered to be lighter yet stronger. The result? A high-performance rifle that weighs five pounds less than the original M107, but is every bit as tough.
    Designed to be used with a suppressor, this one-of-a-kind rifle allows you to combine signature reduction capabilities with the flawless reliability of the original Barrett M107, but with a rifle weight reduction of 5 pounds. An all new bolt carrier group has been designed and is key to making the rifle suppressor-ready. Its steel four-port cylindrical muzzle brake is engineered to work seamlessly with a quick-attach Barrett QDL Suppressor.
    The lightweight aluminum upper receiver features an integrated 27 MOA optics rail. Inside the upper receiver, the bolt carrier rides on a hardened steel anti-wear strip for added durability. A thermal-guard cheek piece protects the user's face from extreme heat or cold.
    Advanced design and manufacturing make the M107A1 more precise than ever. The rear barrel stop and front barrel bushing are bolted and bonded with a high strength compound. A titanium barrel key and fully-chrome-lined bore and chamber add to the rifle's durability.
    Enhanced modularity is also a key feature of the M107A1. The rail-mounted aluminum rear grip can easily be reconfigured. The newly designed titanium and polymer monopod is adjustable from either side.
    The M107A1 rifle's lower receiver includes a new aluminum recoil buffer system that's optimized for use with the Barrett QDL Suppressor. The bolt carrier's components are protected with a mix of ultra-hard coatings and advanced nickel Teflon® plating that increases lubricity, is corrosion-resistant and greatly eases cleaning.
    Numbered witness holes on the magazine are just another example of how even the smallest detail makes a powerful difference.
    Barrett, M107A1, Semi-automatic, 50BMG, 29" Barrel, Black Finish, Synthetic Stock, 10Rd, 1 Magazine, Carry Case, Leupold MK4, 4.5x14, Mil-dot Reticle, M1 Turrets With .25MOA Adjustments, Scope Rings, Bipod, Monopod
    Product Specifications
    • Barrett
    • M107A1
    • Semi-automatic
    • 50BMG
    • 29"
    • Black
    • Synthetic
    • 1 Mag, Carry Case, LP Mark4, Rings, Bipod, Monopod
    • 10Rd
    • 14018
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     
    Add to Cart
    $12,420.00
    $13,694.00
  • BARRETT REC7 GENII 6.8SPC 16" BLK - BFM13960

    This item is in stock at a supplier and should ship to you in 5-7 days.


    Eliminate all doubt.

    Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.
    This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.
    The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.
    The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.
    REC7 Lifestyle
    The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.
    At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.
    The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 Class 2 hardcoat anodized and Cerakote finished. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.
    In 5.56 NATO and 6.8 SPC, the REC7 is everything you’d expect from a Barrett rifle, and then some.
    Barrett, REC7, Semi-automatic, 6.8MM, 16" Barrel, Black Finish, Black Stock
    Product Specifications
    • Barrett
    • REC7
    • Semi-automatic
    • 6.8MM
    • 16"
    • Black
    • Black
    • 13960
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    Add to Cart
    $2,520.00
    $2,835.00
  • BARRETT 99A1 50BMG 32" BLK - BFM13307 (13307)
    This item is in stock at a supplier and should ship to you in 5-7 days.

    Power, pure and simple.

    Model 99
    Rugged. Reliable. Uncomplicated. The Model 99 is designed for one thing only: to get the job done. With its brilliantly simple design, hard-core construction and surprisingly few moving parts, it offers match-winning accuracy time and time again.
    Smooth functionality with dead-on accuracy, shot after shot, the Model 99 in .50 BMG is competition ready. At the heart of this robust and accurate bolt action rifle is a one-piece 7000 series aluminum alloy extrusion. A heat-treated steel M1913 rail is attached to the top of the extrusion by closely spaced high-strength bolts. The match grade barrel is pressed and locked into the receiver, creating a solid unitized structure on which to mount a riflescope. The Model 99 barrel is made in a heavier contour to ensure repeatable accuracy.
    The .416 Barrett caliber brings new levels of precision shooting to the Model 99. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision.
    The bolt is machined from a single piece of S-7 tool steel. The action's strength is exemplified by the 15 bolt lugs that lock into the machined barrel extension. The bolt's few moving parts (extractor, ejector and firing pin assembly) make it reliable and easy to maintain.
    Model 99 in action
    The Model 99 is easily disassembled without tools by removing three quick-release assembly pins. These pins attach the trigger housing and bolt guide to the receiver assembly. The match-quality trigger design is virtually maintenance-free and the bipod can easily be detached for benchrest shooting.
    Known as much for its dependability as its versatility, the Model 99 has unfailing accuracy you can rely on.
    Barrett, 99A1, Single Shot, Bolt Action, 50BMG, 32" Barrel, Black Finish, Bi-Pod
    Product Specifications
    • 816715011398
    • Barrett
    • 99A1
    • Single Shot
    • 50BMG
    • 32"
    • Black
    • Black
    • Bi-Pod
    • 13307
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     
    Add to Cart
    $3,559.00
    $3,967.00
  • BARRETT 95 50BMG BOLT ACTION 29" - BFM13312 (13312)

    This item is in stock at a supplier and should ship to you in 5-7 days.

    Fully loaded.

    Model 95
    The Model 95 may weigh in at a smaller class, but packed into its lightweight bullpup design is the intense power of a .50 caliber magazine-fed weapon, the pinpoint accuracy of a bolt-action rifle and the effortless functionality of a perfectly designed machine.
    This compact rifle offers the velocity and accuracy of a 29-inch barrel in a lightweight package with an overall length of just 45 inches. The Model 95 is made for those who refuse to sacrifice accuracy for power while allowing the shooter to quickly and accurately fire five rounds, reload with a fresh magazine and get back on target in seconds.
    Its buttplate, magazine well and trigger housing are unitized, helping to stiffen the steel lower receiver. The steel upper receiver is reinforced with an M1913 rail and supports the chrome-chambered, fluted barrel. All Barrett rifles are designed for easy field stripping, so the two receivers can be assembled in less than 60 seconds without the use of tools.
     
    The bolt carrier itself is a study in innovation designed for speed, reliability and safety. It slides effortlessly on machined-smooth rails, transporting a large bolt that locks into the barrel extension on three lugs. This bolt carrier assembly is a simplistic design with a quick release lever for fast disassembly. The firing pin is driven by dual springs designed for consistency and lightning-quick lock time.
    Adopted by militaries all over the world, the Model 95 is not just proven in battle, it's also fun to shoot.
    Barrett, M95, Bolt Action, 50BMG, 29" Fluted Barrel, Black Finish, 5Rd, Carry Case and Cleaning Kit, 1 Magazine
    Product Specifications
    • 816715010223
    • Barrett
    • 95
    • Bolt
    • 50BMG
    • 29"
    • Black
    • Black
    • Carry Case and Cleaning Kit - 1 Mag
    • Fluted
    • 5Rd
    • 13312
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.

     
    Add to Cart
    $5,845.00
    $6,671.00
  • BARRETT 82A1 50BMG KIT w/SCOPE SEMI 10RD MAG - BFM13317

    This item is in stock at a supplier and should ship to you in 5-7 days.


    Three Decades Down Range.

    Model 82A1 in action
    After 30-plus years of making history, the powerhouse rifle that started it all is still leading the pack. With its low felt recoil and self-loading action, the Model 82A1 offers rapid, accurate firepower that never slows down.
    For more than three decades, the Model 82A1 has been carefully honed, studied and then refined again. The result is a feat of engineering so infinitely precise it is hard to believe it's man-made.
    As the first and only semi-automatic .50 caliber rifle available, the Model 82A1 continues to blaze new territory. Its chamber is chrome-plated and dimensioned for both civilian and military ammunition. The extractor and ejector are proven to work under any condition, and close tolerances on every part allow it to function in all environments. The muzzle brake, dual barrel springs and long mainspring design make this iconic rifle comfortable and exciting to shoot.
    Model 82A1
    .416 Barrettt Non-Detachable Magazine
    The .416 Barrett caliber brings new levels of precision shooting to the Model 82A1. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision. The Model 82A1 .416 is also available with a non-detachable magazine for state compliance purposes in which the magazine can easily be accessed for loading with a simple tool. For owners that want to swap their .50 caliber configurations to .416 caliber, upper conversion units are available on the Barrett webstore.
    The Model 82A1 fits into a regular sized carrying case. Although it’s transported as a disassembled upper and lower receiver, it can be ready to fire in under a minute. The scope remains mounted on the upper receiver, maintaining zero. The rifle’s M1913 optics rail has a 27 MOA taper to take full advantage of the scope’s elevation travel.
    Emergency iron sights provided. Nerves of steel are not.
    Barrett, 82A1, Semi-automatic, 50BMG, 29" Fluted Barrel, Black Finish, Synthetic Stock, 10Rd, Kit with Mono Pod, 1 Magazine, Carry Case and Cleaning Kit, Leupold MK4, 4.5x14, Mil-dot Reticle, M1 Turrets With .25MOA Adjustments, Scope Rings
    Product Specifications
    • 816715010018
    • Barrett
    • 82A1
    • Semi-automatic
    • 50BMG
    • 29"
    • Black
    • Black
    • 1 Mag, Carry Case, LP Mark4, Rings
    • 10Rd
    • Kit with Mono Pod
    • 13317
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     

     
    Add to Cart
    $9,475.00
    $10,532.00
  • BARRETT 99-416 .416B SGL SHOT 32"BLK - BFM13303 (13303)
    This item is in stock at a supplier and should ship to you in 5-7 days.
    Power, pure and simple.
    Model 99
    Rugged. Reliable. Uncomplicated. The Model 99 is designed for one thing only: to get the job done. With its brilliantly simple design, hard-core construction and surprisingly few moving parts, it offers match-winning accuracy time and time again.
    Smooth functionality with dead-on accuracy, shot after shot, the Model 99 in .50 BMG is competition ready. At the heart of this robust and accurate bolt action rifle is a one-piece 7000 series aluminum alloy extrusion. A heat-treated steel M1913 rail is attached to the top of the extrusion by closely spaced high-strength bolts. The match grade barrel is pressed and locked into the receiver, creating a solid unitized structure on which to mount a riflescope. The Model 99 barrel is made in a heavier contour to ensure repeatable accuracy.
    The .416 Barrett caliber brings new levels of precision shooting to the Model 99. With the enhanced accuracy and increased velocity of the .416 Barrett cartridge, this rifle offers incredible long-range precision.
    The bolt is machined from a single piece of S-7 tool steel. The action’s strength is exemplified by the 15 bolt lugs that lock into the machined barrel extension. The bolt’s few moving parts (extractor, ejector and firing pin assembly) make it reliable and easy to maintain.
    Model 99 in action
    The Model 99 is easily disassembled without tools by removing three quick-release assembly pins. These pins attach the trigger housing and bolt guide to the receiver assembly. The match-quality trigger design is virtually maintenance-free and the bipod can easily be detached for benchrest shooting.
    Known as much for its dependability as its versatility, the Model 99 has unfailing accuracy you can rely on.
    Barrett, 99-416, Single Shot, Bolt Action, 416 Barrett, 32" Barrel, Black Finish, Bi-Pod
    Product Specifications
    • 816715010247
    • Barrett
    • 99-416
    • Single Shot
    • 416 Barrett
    • 32"
    • Black
    • Black
    • Bi-Pod
    • 13303
    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
    Add to Cart
    $3,620.00
    $3,967.00
  • BARRETT M107A1 50BMG 29" BLACK 10RD - BFM14085 (14085)

    A whole new legend.

     
    It may be related to the Model 82A1®/M107®, but the M107A1 is far from a simple evolution. Driven by the demands of combat, every component was re-engineered to be lighter yet stronger. The result? A high-performance rifle that weighs five pounds less than the original M107, but is every bit as tough.
    Designed to be used with a suppressor, this one-of-a-kind rifle allows you to combine signature reduction capabilities with the flawless reliability of the original Barrett M107, but with a rifle weight reduction of 5 pounds. An all new bolt carrier group has been designed and is key to making the rifle suppressor-ready. Its steel four-port cylindrical muzzle brake is engineered to work seamlessly with a quick-attach Barrett QDL Suppressor.
    The lightweight aluminum upper receiver features an integrated 27 MOA optics rail. Inside the upper receiver, the bolt carrier rides on a hardened steel anti-wear strip for added durability. A thermal-guard cheek piece protects the user's face from extreme heat or cold.

    Advanced design and manufacturing make the M107A1 more precise than ever. The rear barrel stop and front barrel bushing are bolted and bonded with a high strength compound. A titanium barrel key and fully-chrome-lined bore and chamber add to the rifle's durability.
    Enhanced modularity is also a key feature of the M107A1. The rail-mounted aluminum rear grip can easily be reconfigured. The newly designed titanium and polymer monopod is adjustable from either side.

    The M107A1 rifle's lower receiver includes a new aluminum recoil buffer system that's optimized for use with the Barrett QDL Suppressor. The bolt carrier's components are protected with a mix of ultra-hard coatings and advanced nickel Teflon® plating that increases lubricity, is corrosion-resistant and greatly eases cleaning.

    Numbered witness holes on the magazine are just another example of how even the smallest detail makes a powerful difference.
    Barrett, M107A1, Semi-automatic, 50BMG, 29" Barrel, Black Finish, Synthetic Stock, 10Rd, Bipod
    Product Specifications
    • 816715012432
    • Barrett
    • M107A1
    • Semi-automatic
    • 50BMG
    • 29"
    • Black
    • Synthetic
    • Bipod
    • 10Rd
    • 14085

    NOTE: Check your state & local laws before ordering to ensure that no modifications are required.
    NOTE: FFL required for shipment. You must note which FFL will be receiving this item in the Comment box during checkout. Failure to do so will delay your order processing and shipping. If your FFL is not already on file, have them email a signed copy of their license to sales@protacticalsolutions.com and include your name and order number on the cover sheet.
     
    This item is in stock at a supplier and should ship to you in 5-7 days.
     

     
    Add to Cart
    $11,250.00
    $12,281.00
Per Page      1 - 11 of 11